Inline Disk Filters, Glass Fiber
Our Glass Fiber Disk Filter housings are 50mm in diameter and are made of 100% polypropylene. They are thermally bonded. We do not use adhesives.
Both the entry and exist ends are 7-13 mm stepped hose barb. A standard luer slip syringe can be used as well. The membrane filtration area is > 3 square inches. The maximum operating pressure is > 45 psi.
All of the Tisch disk filters can be sterilized by autoclave using a cycle of 30 minutes at 123 degrees C at 1 bar. In place steam sterilization is not recommended. An integrity test should be performed after autoclaving
|Maximum operating temperature||60 Degrees C|
|Filtration Area (cm2)||19.6|
|Burst pressure (KPa)||300|
|Pore Sizes Available||0.45um, 1um/td>|
Tisch Scientific Glass Fiber (GF) Disk Filter, 1.0 µm, 50 mm, Stepped Barb: 5/16 to 1/2, Nonsterile, 10 Pack, DF15283Regular Price $44.14 Price $38.38
Tisch Scientific Glass Fiber (GF) Disk Filter, 0.45 µm, 50 mm, Stepped Barb: 5/16 to 1/2, Nonsterile, 10 Pack, DF17139Regular Price $44.14 Price $38.38