PTFE Syringe Filters, 0.45 um, 30mm, Luer-Lok/Luer Slip, Nonsterile, 100 per pack, SF16000
- Buy 10 for Price $129.03 each and save 10%
Click image to zoom
Questions? Contact us via live chat, firstname.lastname@example.org or call 513.467.0413.
Please note: We strive for accurate stock but counts can change without notice.
Tisch Scientific PTFE Syringe Filters are used for the filtration of liquid samples that contain insoluble impurities and are made from high quality materials with very low levels of extractables. The housing material is high quality polypropylene which is chemically resistant to a wide range of solutes and solvents.
These filters are constructed so that the sample must pass through the membrane, not leak around it. They are easy to use. They may be used with any luer-lock syringe. The 13mm filters can filter 5 to 10mL of sample and have a retention volume of only 28µL.
Product Uses & Filtration Applications
- Organic Solvents
- Venting Applications
Product Support Documents
Need Help Determining the Appropriate Membrane Filter to Use?
Check Out These Additional Resources:
|PRODUCT SPEC TABLE|
|Tisch Product Code||SF16000|
|Filtration Area||4.9 cm^2|
|Pore Size||0.45 µm|
|Filter Size||30 mm|
|Output Connector||Luer Slip|
|Maximum Operating Temperature||130° C|
|Bubble Point||0.05 psi|
|Burst Pressure||87 psi|
|Flow Rate||60 ml/min @ 10 psi|
|Volume Throughput||120 ml|
|Housing Material||Polypropylene (PP)|
|Sterilization||Autoclave: 121° C for 30 Minutes
Gamma: 5kg, for 8 Hours
|Incompatible With||Aqueous Samples Without Rewetting.|