Whatman 2107, SteriVENT 150, 0.2 um, inlet 3/8 to 1/2" stepped hose barb, outlet 3/8 to 1/2" stepped hose barb
Whatman 2107, SteriVENT 150
Whatman 2107, SteriVENT 150, 0.2 um, inlet 3/8 to 1/2" stepped hose barb, outlet 3/8 to 1/2" stepped hose barb
Whatman product code | 2107 |
---|---|
Complete Packsize | 1 Piece |
Filtration Area | 2000 cm² |
Filtration Media | Polytetrafluoroethylene (PTFE) |
Housing | Polypropylene (PP) |
Operating Pressure Max. | 2 bar - forward direction (29 psi - forward direction) |
Pore Size | 0.2 µm |
Sterilization | Can be autoclaved at 121°C for 20 minutes (maximum 132°C). Multiple autoclave cycles are possible. However, the responsibility for reuse is with the operator. The device should be protected from cross contamination. An integrity test should be performed after autoclaving. Compatible with EtO sterilization. |
Regular Price
$215.00
Price
$170.28
In stock
SKU
2107
Questions? Contact us via live chat, support@tisch-env.com or call 513.467.0413.
Please note: We strive for accurate stock but counts can change without notice.
PolyVENT are integral Filter products for sterile venting of vessels and tanks. These devices are constructed from a single, standardized set of materials PTFE membranes and polypropylene housing to simplify the approval process.
Features:
Features:
- Pass the HIMA challenge test for sterilizing grade.
- Retain
1CFU/cm^2 Brevundimos diminuta per ASTM F838-83 standards; this microbial retention is correlated to 1% integrity testing during manufacturing (rated in liquid). (1% integrity testing is carried out only on the capsules). - Membrane made of hydrophobic .2 um PTFE membrane.
- Validated for 5 steam autoclave cycles; compatible with EtO.
- Testable by Water Break Through (WBT) test or bubble point testing.
- Pass USP Class VI biosafety tests for plastics.
- Manufactured in clean room facilities.
- bidirectional and autoclavable.
Grade | STERIVENT 2000 |
---|---|
Manufacturer | Whatman |